FORD Eco boost 1.0 litre wet belt renewal

Photo - see caption
Oil strainer blocked
Photo - see caption

 

The FORD 998cc Eco boost wet belt (cam belt) is scheduled for its replacement every 10 years but unfortunately we are seeing them deteriorate far sooner than their scheduled renewal times.

 

Early warning signs that your belt requires replacing is that the oil light may come on in-between servicing. This is due to the rubber particles from the belt breaking up and blocking up the oil strainer and oil feeder components. If this happens then the particles eventually work themselves into the engine sump and then around the oil system blocking other components. 

If this is not addressed quickly then it can lead to a disastrous engine failure.

The Eco-boost engines swere fitted to Ford Fiestas, Focus, Transit vans and B-max from around 2012 so they are all coming up for renewal from that age onwards. We  advise, irrespective of mileage, that they are replace 6 - 8 years maximum. 

Replacing this wet belt is an extremely labour intensive job and requires a number of components to be renewed including gaskets, belts and various seals. It takes 2 days to renew this belt. Cost for replacing this belt will vary depending on what components are contaminated. 

The following components are replaced as part of this job - this may vary depending on what we find when the belt is removed

Timing belt (wet belt) kit

Oil pump drive belt

Engine oil and oil filter

Auxiliary drive belt

Crank shaft oil seal

Various seals and gaskets

If you employ a garage to carry out a wet belt renewal and they do not replace all of these components you will have on going problems with the oil strainer picking up debris. So please do call us and we will happily advise you of the reasons why the items must be replaced